Project Engineer – Automotive New Product Development (NPD) · M.Sc. Chemical and Energy Engineering student, Otto von Guericke University Magdeburg
Magdeburg, Germany · LinkedIn
I spent 2 years 9 months at Sansera Engineering, a Tier-1 automotive supplier in Bengaluru: a 12-month graduate trainee program, then 21 months as NPD Project Engineer. There I handled a portfolio of 50 NPD projects for precision engine components (crankshafts, connecting rods, rocker arms) from concept to Start of Production (SOP) under APQP, PPAP and IATF 16949.
Since 10/2024 I've been studying in Magdeburg, where most of my project work is simulation: CFD in Simcenter STAR-CCM+ and ANSYS Fluent, process simulation in DWSIM, life cycle assessment in OpenLCA, and numerical methods in MATLAB. This GitHub holds that work – reports, simulation files and scripts.
I'm looking for Werkstudent and full-time roles in automotive project engineering and NPD project management in Germany.
| Project | What it is | Tools | Team |
|---|---|---|---|
| CFD wind study of the Brandenburg Gate | Wind loads on a full-scale 3D model at 9 and 18 m/s, front-on and side-on, steady RANS with SST k-ω, 4-mesh grid independence study (1.2–2.8 M cells). Same repo: course exercises (submarine hull, backward-facing step k-ε vs k-ω) and hand-written MATLAB solvers. | Simcenter STAR-CCM+, MATLAB | Individual, OVGU 2026 |
| Carbon capture in steam methane reforming – LCA | DWSIM flowsheet (reformer, water-gas shift, PSA, 3-stage CO₂ compression to 110 bar) and a gate-to-gate LCA in OpenLCA to ISO 14040/14044. 88 % CO₂ recovery from the PSA off-gas. | DWSIM, OpenLCA, LaTeX | Team of 4, OVGU 2026 |
| Dynamics of static stall | B.E. thesis. Unsteady 2D flow over a flat plate at Re ≈ 1000, angle of attack 0–32.5°, stall between 24° and 25°, flow regimes identified with FFT, wavelet and recurrence analysis. | ANSYS Fluent, MATLAB | Team of 4, NIE Mysuru 2021 |
| MachViz – nozzle flow analysis | Flow through a converging-diverging nozzle, three ways: a MATLAB 1-D isentropic solution (written by me with AI help), a Python wall-profile check co-written with teammates, and a 2-D Euler finite-volume solver written with a teammate and an AI coding assistant (my focus: HLLC/HLL fluxes, plume and shock handling, warm start). Grid study: nozzle mass flow and thrust mesh-converged to about 1 %, Richardson extrapolation within about 0.5–0.7 %; the plume is not grid-independent. | Python (NumPy, Matplotlib), MATLAB | Team of 6, OVGU 2026 |
- NPD and quality: APQP, PPAP, SOP launch, IATF 16949, PFMEA, control plans, MSA, SPC, 8D, root cause analysis, GD&T, Lean/Kaizen
- Simulation: Simcenter STAR-CCM+, ANSYS Fluent, DWSIM, OpenLCA, MATLAB, Python
- Engineering software: SAP, Siemens Teamcenter, SolidWorks, Mastercam, LaTeX